Setting a message indication, Canceling messages, Returning messages – Samsung ITP-5107SIP User Manual

Page 40

Advertising
background image

To retrieve an automatically parked call:

Dial 10 plus the number that was announced. If you have a PAGPK button,
press it and dial the number that was announced. If you have a PARK button,
press it and dial the announced orbit number.

You will be connected to the parked call.

NOTES:
1.

If the call is not retrieved within a pre-programmed period of time, it will recall
your keyset and have a slow flashing amber light. You cannot park and page
intercom calls.

2.

If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin dialing.

SETTING A MESSAGE INDICATION

When you are calling another station and no one answers or you receive a busy
signal, you can leave a message indication:

Press the MESSAGE button or dial 43 and receive confirmation tone.

Hang up. The MESSAGE button on the called station will light. Standard tele-
phones receive special dial tone as a message indication or a lit message
lamp, if the phone is equipped with one and they are connected to an 8MWSLI
card (not available on the OfficeServ 100 or OfficeServ 7000 Series) or a
16MWSLI card on the system.

NOTES:
1.

A station can have up to five message indications.

2.

If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin dialing.

CANCELING MESSAGES

To cancel a message indication that you left at another station, dial 42 plus the
extension number of the station at which you left a message. To cancel all mes-
sage indications left at your keyset, dial 42 plus your extension. Your MESSAGE
light will go out.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin dialing.

RETURNING MESSAGES

Press the MESSAGE button or dial 43. The first station that left a message will
be called automatically. If that station does not answer, your MESSAGE light
will stay on.

Repeat until all messages have been returned in the order received.

Your MESSAGE light will turn off when all messages have been returned.

33

5107S_keyset.qxp 5/9/2006 9:56 AM Page 39

Advertising