Set answer mode (intercom), Set answer mode (co), Automatic hold – Samsung ITP-5107SIP User Manual

Page 49: Headset operation

Advertising
background image

SET ANSWER MODE (INTERCOM)

You can receive internal calls in one of three modes (see Answering Intercom Calls
under Intercom Calls for descriptions):

While on-hook, press TRANSFER and then dial 103.

Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce.

Press TRANSFER to store your selection.

SET ANSWER MODE (CO)

Your incoming CO calls can be set to follow the intercom answer mode.

While on-hook, press TRANSFER and then dial 110

Dial 15 to access AUTO ANS CO.

Press the VOLUME UP or DOWN key to change status.

Press TRANSFER to store your selection.

AUTOMATIC HOLD

While on an outside call, pressing a line button, route button or a flashing CALL
button will automatically put your call on hold and connect you to the next call.
This feature can be turned on or off at your keyset.

With the handset on-hook, press TRANSFER and then dial 110.

Dial 001 to turn Automatic Hold on or 000 to turn it off.

Press TRANSFER to store your selection.

NOTE: Intercom calls can be automatically put on hold by pressing TRANSFER.

HEADSET OPERATION

Keyset users can switch between headset mode and handset mode. When using
headset mode, press the FLASHING CALL button to answer and release calls.

With the handset on-hook, press TRANSFER and then dial 110.

Dial 021 to use the headset or 020 to use the handset.

Press TRANSFER to store your selection.

Your keyset may be equipped with a Headset mode button. If it is so equipped
pressing this button while the light is out will cause the keyset to enter headset
mode and the light will illuminate to indicate this. Pressing the button while the
light is lit will cause the keyset to return to handset mode and the light will go out.

42

5107S_keyset.qxp 5/9/2006 9:56 AM Page 48

Advertising