Call progress displays, Display number dialed, Call duration timer – Samsung ITP-5107SIP User Manual

Page 54: Auto timer, Timer function

Advertising
background image

CALL PROGRESS DISPLAYS

During everyday call handling, your keyset display will provide information that is
helpful and in some cases invaluable. Displays like [CALL FROM 203], [TRANSFER
TO 202], [701: RINGING], [TRANSFER FM 203], [708 busy], [Camp on to 204], [Recall
from 204], [Call for 501], [message frm 204] and [FWD ALL to 204] keep you in-
formed of what is happening and where you are. In some conditions you are
prompted to take an action and in other cases you receive directory information.

DISPLAY NUMBER DIALED

Display keysets begin showing digits as they are dialed. They will stay in the dis-
play until the call duration timer comes on automatically or the TIMER button is
pressed. If the call duration timer is not used, the number dialed will be displayed
until the call is released, transferred or put on hold.

CALL DURATION TIMER

The system can be set to automatically time outside calls. A few seconds after you
dial a telephone number, the timer appears in the display. It appears immediately
for incoming calls. The call timer continues for the duration of the call. Call dura-
tion times are displayed in minutes and seconds. If a call lasts longer than 60 min-
utes, the timer restarts.

You can press the TIMER button to manually begin timing a call. Press it again to
stop timing. If you press it while the automatic timer is on, the call duration time is
restarted.

AUTO TIMER

Display keyset users may have the timer automatically start when they answer
incoming calls or after a short delay on an outgoing call.

With the handset on-hook, press TRANSFER and then dial 110.

Dial 011 to turn the auto timer on or 010 to turn it off.

Press TRANSFER to store your selection.

TIMER FUNCTION

Display keyset users may use this feature as a simple stopwatch.

When the keyset is idle, press the TIMER button to start timing.

Press the TIMER button again to stop timing.

Read the elapsed time in the display.

Lift the handset and replace it. The display will return to date and time.

47

5107S_keyset.qxp 5/9/2006 9:56 AM Page 53

Advertising