Samsung RB195ZA** - Manual (Page 6)

6
PREPARING THE FRIDGE / FREEZER
Install all shelves and compartments
removed during transport and place them in
the correct position.
You are advised to clean the appliance and
accessories before switching the appliance
on for the first time to remove any dust that
accumulated during packing and shipping.
Switch on the appliance for approximately 2
hours before loading it with frozen food for
the first time. Do not load with frozen food
until the freezer temperature is at least 0°F.
If you want to store frozen food as soon as
possible, set the temperature control to the
coldest temperature (-14°F) and let the
appliance operate for one hour.
The appliance is preset for normal
operation. We recommend temperatures of
38°F in the fridge and -2°F in the freezer.
The interior light of the appliance will light
up when the door is open.
This interior light will go out when the door
is closed.
Your appliance is operated by a compressor
which switches “on and off” to maintain the
internal temperature. When the compressor
is new, it requires running for a period of up
to five months. During this period, it may be
slightly noisy. This is quite normal and does
not represent a fault.
Store food once the temperature in the
refrigerator is sufficiently low. It takes a few
hours after starting the refrigerator to reach
the proper temperature.
If the appliance does not operate correctly,
check the electricity supply. If the problem
persists, contact your dealer.
To prepare your appliance for use and check that it is running correctly, take the following steps.
VIEW OF YOUR FRIDGE / FREEZER
Fridge Light
Fridge
Fridge Shelves
Humidity Controlled
Drawer
Ice Maker and
Ice Storage Bin
Wire Drawer
Multi-Purpose Door Bins
Bottle Bins
Freezer Light
Deli Drawer
Door Switch