Program/service menu, User settings – Siemens OPENSTAGE 20 5000 User Manual
Page 20
Getting to know your OpenStage phone
20
Program/Service menu
You can make local settings here.
Press the
N key and confirm the User menu. If configured, enter and
confirm your personal user password.
You can use the click wheel to navigate through the menus as described
on
Æ page 15. Once the admin password has been entered, the
Admin
menu is available to the relevant service personnel.
User settings
In the
User menu, settings options are provided that allow you to adapt the
telephone to your individual requirements.
Select one of the following menus with the click wheel:
•
•
•
•
"Phone"
•
"Locality"
•
"Security"
•
"Network information"
•
"Reset"
If you are in one of these menus or submenus, depending on the situation,
you have the following options to leave the menus:
•
Save & Exit (If you have made a setting and want to keep it)
•
Exit (Discard Changes) (If you have made a setting which you do not
want to use after all or if you do not want set any of the options)
•
Back (If you want to leave the main menu or submenu)
•
Press and hold the
$ key to access the option to leave the menu.
•
You exit the menu by pressing the
N key and return to idle mode
Interrupting editing in the menu
You can interrupt editing in the menu, for example, to call someone or to
answer a call. Then press the
N key. This takes you back to the point in
the menu from which you exited.
This is however only possible for a limited period which is by service per-
sonnel using the inactivity timeout setting. If the configured time expires,
you need to reenter your password when opening the menu and manually
go to the required point in the menu.
Interrupting the editing:
•
By pressing the
N key you interrupt the editing, leave the menu and
return to idle mode
•
If you receive a call during editing and you answer it, you automatically
change to the call view.
To go back to editing mode in the menu, press the
N key again.