Siemens OPENSTAGE 20 5000 - Manual (Page 54)

Step by step
Enhanced phone functions
54
Call waiting (second call)
You can accept a second incoming call in the course of
an ongoing call. The caller hears the on-hook signal
while you hear a call-waiting signal tone. A bell appears
on the display and next to it the phone number of the
caller is shown.
You can ignore or accept the second call. Before you ac-
cept the second call, you can end the first call or place
it on hold for subsequent retrieval.
You can block the second call or the signal tone
(
Æ page 57).
Accepting a second call
Prerequisite: You are conducting a call and call waiting
is allowed (
Æ page 57).
Select and confirm the option shown.
You can talk to the second party.
The connection to the first party is on hold.
You can still
•
toggle between an initial and second call or
• initiate a conference
Consultation call from second call
If the second call is your active call you can initiate a
consultation call from it.
From a consultation call in the second call you can
•
initiate a conference
• toggle between the second call and a consultation
call
• transfer a call
• disconnect the calls again
During a consultation in the second call, the first call is
parked and can only be unparked when the consultation
or second call ends or these calls were connected.
Disconnect second call
Select and confirm the option shown.
The call to this station is disconnected and the call to
the first station is reconnected.
Accept l
Disconnect & return? f