Siemens OPENSTAGE 20 5000 - Manual (Page 65)

Enhanced phone functions
65
Step by step
Using autodial delay
A number is automatically dialed after a set delay start-
ing from the entry of the number’s last digit. The auto-
dial delay can be used:
•
when dialing in idle mode
• Consultation
• when transferring an answered call.
The delay can be reduced by performing one of the fol-
lowing activities:
i
• pressing the
i key. This always works.
^
• lifting the handset. This only works if the phone num-
ber was entered when the phone was idle or if it was
entered for a consultation call when the handset was
off hook.
n
• pressing the loudspeaker key (OpenStage 20/20 G
only). This only works if the phone number was en-
tered when the phone was idle and the loudspeaker
key was not lit or if the phone number was entered
for a consultation call and the loudspeaker key was
not lit.
If an emergency number is preset by your ser-
vice personnel, the autodial delay for this phone
number is reduced to one second.
Automatic dial delay does not work if you are us-
ing a dial plan and
Immediate dialing is config-
ured (see Æ page 33). The number is automati-
cally dialed as soon as the string entered
matches an entry in the dial plan.