Sharp UX-300 - Manual (Page 45)

<P=003>
6
Enter the name of the party by pressing the number keys as shown in
the chart below. Up to 20 characters can be entered.
••••
If you don’t want to enter a name, skip this step.
••••
To enter two letters in succession that require the same key, press
the SPEAKER key after entering the first letter.
Example: SHARP = 7 7 7 7 7 4 4 4 2 2 7 7 7 7 7 7
7
Press the START/MEMORY key.
8
Return to Step 3 to store another number, or press STOP to exit. If
the number will be used for Rapid Key Dialing, you can write the
name on the appropriate Rapid Key label.
Step 3 or
START/MEMORY
STOP
Storing area codes and access codes
You can also store an area code or access code in a Rapid Key or
Speed Dial number. To use this number to dial, see Chain Dialing in
Chapter 5, Making Telephone Calls.
Note: An area code or access code stored in a Rapid Key or Speed Dial
number can only be used if the handset is lifted or the SPEAKER key
pressed before dialing.
SPEAKER
A =
B =
C =
D =
E =
F =
G =
H =
I =
J =
K =
L =
M =
N =
O =
P =
Q =
R =
S =
T =
U =
V =
W =
X =
Y =
Z =
SPACE =
2.
S
e
nd
in
g
Do
cu
me
n
ts
Sending a Fax by Automatic Dialing
43