Sharp UX-300 User Manual

Page 60

Advertising
background image

<P=003>

Note: If you place a large number of originals in the feeder, the memory
may become full before all of them can be scanned (MEMORY IS FULL
will appear in the display). If this happens, press the START/MEMORY
key to copy the originals which have been scanned, and then repeat the
copy procedure for the remaining originals, including the original which
was being scanned when the memory became full.

Copy Cut-off

When making a copy of a document that is longer than the printing
paper, use the copy cut-off setting to select whether the remaining part
of the document will be cut off or printed on a second page. The intial
setting is YES (cut off the remainder). To change the setting, follow
the steps below.

1

Press these keys:

The display will show:

FUNCTION

6

COPY CUT-OFF

2

Press 1 to set copy cut-off to YES (the
remaining part of the document will
not be printed), or 2 to set copy cut-off
to NO (the remaining part will be
printed on a second page).

or

1

2

YES

NO

The display will show:

INITIALIZE FILM

3

Press the STOP key to return to the
date and time display.

STOP

Making Copies

58

Advertising