Sharp UX-300 - Manual (Page 92)

<P=003>
Setting 5: TEL/FAX REMOTE NUMBER
If you hear a fax tone when you answer a call on a touch-tone extension
phone connected to the same line as the fax, you can make the fax begin
reception by pressing 5,
*, and * on the phone. Use this setting if you
want to use a number other than 5 to begin fax reception. You can enter
any number from 0 to 9.
• Initial setting: 5
FUNCTION
4 Press
until
display
shows:
TEL/FAX REMOTE #
Enter a number
from
0 to 9
REMOTE RECEPTION
STOP
Setting 6: REMOTE RECEPTION SELECT
If you don’t intend to use the above TEL/FAX REMOTE NUMBER,
you can turn detection of the number off. This will ensure that the fax
never mistakenly attempts to begin reception if it detects a signal similar
to the TEL/FAX REMOTE NUMBER while you are talking on an
extension phone. Press 1 to turn detection on, or 2 to turn detection off.
• Initial setting: 1
FUNCTION
4 Press
until
display
shows:
REMOTE RECEPTION
STOP
2 1
YES NO
or TRANSACTION LIST
Option Settings
90