Sharp UX-300 - Manual (Page 95)

<P=006>
Setting 11: DISTINCTIVE RING
This sets the ring pattern to which your fax will answer if you subscribe
to a distinctive ring service. Enter a number from 1 to 5 to select a
pattern. See Distinctive Ring in Chapter 7 for more details.
• Initial setting: 5
FUNCTION
4 Press
until
display
shows:
DISTINCTIVE RING
STOP
Enter a number
from
1 to 5
FAX SIGNAL RX
Setting 12: FAX SIGNAL RECEIVE
Your fax will automatically begin reception if you hear a high-pitched
fax tone after answering a call on your fax or an extension phone. If you
use a computer fax modem to send documents on the same line, you
must turn this function off in order to prevent your fax from mistakenly
attempting to receive documents from the computer fax modem. Press 1
to turn the function on, or 2 to turn it off.
• Initial setting: 1
FUNCTION
4 Press
until
display
shows:
FAX SIGNAL RX
STOP
2 1
YES NO
or
JUNK # CHECK
Setting 13: JUNK FAX NUMBER CHECK
Press 1 to prevent reception from fax numbers entered in the Anti Junk
Fax List. Press 2 to allow reception from all numbers.
• Initial setting: 2
FUNCTION
4 Press
until
display
shows:
JUNK # CHECK
STOP
2 1
YES NO
or POLLING
8.
Op
ti
on
S
e
tt
in
gs
Option Settings
93