Sharp VL-Z400H-T - Manual (Page 55)

Useful Features
43
Self Recording
Normal self recording
Available modes:
Tape Camera, Card Camera
Open the LCD monitor and rotate it 180°
vertically so that the screen faces the other
way and the subject can monitor the shot
while you are recording with the viewfinder.
If the camcorder is steadied, you can record
yourself in the scene by watching yourself
on the LCD monitor. The remote control is
useful for such occasions.
1
Pull out the viewfinder completely.
Open the LCD monitor to a 90° angle
to the camcorder body (1), and then
rotate it 180° vertically (2).
2
Set the Media Selection switch to V
or u.
3
Set the Power switch to v.
• The subject is displayed in the
viewfinder, and a mirror image of the
subject is displayed on the LCD
monitor.
4
Begin recording.
Notes:
• Use the remote control to begin/stop
recording on tape.
• You can play back images while the monitor
is in the self recording position. Set the
camcorder to Tape Playback or Card
Playback mode.
90°
180°
(Continued on the next page)
VL-Z400H-037-047 04.3.23, 8:42 AM 43