Samsung CLP-610 - Manual (Page 48)

7.4
<Troubleshooting>
9 Remove the jammed paper by pulling in the direction shown. To
avoid tearing the paper, pull it out gently and slowly.
Caution
• Do not touch the green surface, the OPC drum or the front of
each toner cartridge, with your hands or any other material.
Use the handle on each cartridge in order to avoid touching
this area.
• Be careful not to scratch the surface of the paper transfer
belt.
• If you leave the front cover open for more than a few minutes,
the OPC drum can be exposed to light. This will cause
damage to the OPC drum. Close the front cover should the
installation need to be halted for any reason.
10 Close the front cover firmly. The machine will resume printing.
Caution
If the front cover is not completely closed, the machine will not
operate.
In the fuser unit area
If paper is jammed in the fuser unit area, follow the next steps to release
the jammed paper.
1 Open the top cover.
2 Open the inner cover using the handle on it.
Caution
Do not touch the fuser inside the inner cover. It is hot and could
cause burns! The fuser's operating temperature is 180°C
(356°F). Take care when removing paper from the machine.