Sharp XG-C60X - Manual (Page 25)

Connections and Setup
-21
Connecting to an Amplifier
Connecting to an
Amplifier or Other Audio
Components
Using a ø3.5 mm stereo minijack to RCA au-
dio cable, an amplifier or other audio compo-
nents can be connected to the AUDIO OUT-
PUT terminal.
Connect the projector to the amplifier
using a ø3.5 mm stereo minijack to
RCA audio cable (commercially
available).
Info
•
By using external audio components, the
volume can be amplified for better sound.
•
The AUDIO OUTPUT terminal allows you
to output audio to audio components from
the selected AUDIO input terminal (for
INPUT 1 and 2) or AUDIO (L/R) input ter-
minals (for INPUT 3 and 4) connected to
audiovisual equipment.
•
For details on Variable Audio Output (VAO)
and Fixed Audio Output (FAO), see
page
63 .
•
A ø3.5 mm stereo minijack to RCA audio
cable (commercially available) is required
for audio input.
Amplifier
Audio input terminal
ø3.5 mm stereo minijack to RCA audio cable
(commercially available)
XG-C60X_E_PDF_p19_24.p65 03.8.28, 1:57 PM 21