Correcting trapezoidal distortion – Sharp XG-C60X User Manual

Page 42

Advertising
background image

Correcting Trapezoidal Distortion (

Keystone Correction

)

Correcting Trapezoidal
Distortion

This function allows for Keystone (On-screen
Trapezoidal Distortion) Correction.

Note

When the image is projected either from
top or from bottom towards the screen at
an angle, the image becomes distorted
trapezoidally.
The function for correcting trapezoidal dis-
tortion is called Keystone Correction.

The Keystone Correction can be adjusted
up to angle of approximately ±35 degrees.

1

Press

.

Pressing

again while the BOR-

DER, STRETCH or SMART STRETCH
screen is displayed will start the Digital
Shift function. See page

39

.

2

Press ', ", \ and | to adjust

the Keystone correction.

If you want to make more detailed cor-
rections, press

to display the test

pattern, and then press '

'

'

'

', "

"

"

"

", \

\

\

\

\ and

|

|

|

|

| to make the adjustments.

Note

Since the trapezoidal distortion of the im-
age can be corrected up to an angle of
approximately ±35 degrees, the actual
screen can be diagonally set up to that
angle as well.

Press

to cancel Keystone Correction.

When no signal is detected, the test pat-
tern will be displayed without pressing

.

3

Press

.

Note

You can use the same settings used
in NORMAL mode 4:3 for 16:9.

Straight lines or the edges of images
may appear jagged while adjusting
the image.

KEYSTONE button

UNDO button

ENTER button

Normal screen

Keystone Correction screen

Compresses
upper side.

Compresses
lower side.

Test pattern

-38

', ", \, |
buttons

XG-C60X_E_PDF_p33_41.p65

03.8.28, 2:08 PM

38

Advertising