Tuner operations, Listening to fm/am radio, Automatic tuning – Sony HTSF2300 User Manual
Page 49: Press tuner repeatedly to select the fm or am band, Press tuning + or tuning, You can also use input selector on the receiver
49
GB
T
u
n
e
r O
p
era
tions
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas to the receiver (page 24).
Tip
The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
details on area codes, see page 4.
* The AM tuning scale can be changed (page 72).
1
Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Press TUNING + or TUNING –.
Press TUNING + to scan from low to
high; press TUNING – to scan from high
to low.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
If the FM stereo reception is poor and “ST”
flashes on the display, select monaural audio
so that the sound will be less distorted.
To select monaural audio, you can
– press FM MODE repeatedly until the
“MONO” indicator lights up on the display.
– set “FM MODE” in TUNER menu to “FM
To return to stereo mode, you can
– press FM MODE repeatedly until the
“MONO” indicator on the display do not
light up.
– set “FM MODE” in TUNER menu to “FM
Tuner Operations
Area code
FM
AM
U, UC, CA
100 kHz
10 kHz*
AU, TW, TH
50 kHz
10 kHz*
CEL, CEK
50 kHz
9 kHz
Automatic tuning
1
2
3
4
6
7
8
0/10
ENTER
9
SYSTEM STANDBY
VIDEO1
VIDEO2
BD
DVD
2CH
A.F.D.
RETURN/EXIT
TV CH –
PRESET –
TV CH +
PRESET +
TUNING –
TV
TUNING +
FM MODE
REPLAY ADVANCE
MOVIE
MUSIC
AMP MENU
CLEAR
DISPLAY
MUTING
TV VOL
MASTER VOL
DVD/BD
MENU
AUTO CAL
D.TUNING
D.SKIP
THEATRE
SAT
TV
SA-CD/CD TUNER
-
.
H
m
M
X
x
<
<
>
O
5
>10
MEMORY
MENU/HOME
TOOLS/
OPTIONS
2
1
FM MODE