Searching for and storing the radio stations, Selecting a stored station, Improving radio reception – Samsung EV-1S User Manual

Page 15

Advertising
background image

14

You can store up to:

15 FM stations

15 MW stations

7 LW stations

Switch the system on by pressing On/Standby (

).

Select the required frequency band by pressing Band on the
remote control.
Result: The appropriate indication is displayed:

FM

Frequency Modulation

AM(MW)

Medium Wave

LW

Long Wave

To search for a

Press Mode on the remote

station...

Control

Manually

One or more times until

Manual

is

displayed.

Automatically

One or more times until

Auto

is

displayed.

PRESET function is explained in detail in the section
“Selecting a Stored Station” on.

Select the station to be stored by:

Pressing

or

buttons to increase or decrease the

frequency respectively.

To scroll through the frequencies faster when
searching manually, hold down the

or

buttons.

The automatic search procedure may stop on a
frequency that does not correspond to a radio station.
If this happens, use the manual search mode.

If you do not want to store the radio station found, revert to Step 4
and search for another station.

Otherwise:

a Press Program/Set.

Result:

’Program No.’

is displayed for a few seconds.

b Press Program/Set to store the radio station.

Result:

’Program No.’

is no longer displayed and the station is

stored.

To store any other radio frequencies required, repeat Steps 3 to 5.

The PROGRAM function can be used to assign a new station
to an existing program number.

You can improve the quality of radio reception by:

Rotating the FM or AM(MW) aerial

If reception from a specific FM radio station is poor, press Mono/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.

You can listen to a stored radio station as follows:

Switch the system on by pressing On/Standby ( ) .

Select the required frequency band by pressing Band on the
remote control.

Select the radio station as follows.

To listen to ...

Press ...

Stored station

1. Press the Mode button on the remote

control until “

Preset

” is displayed.

2. Press

or

button to select the

required program.

1
2

3

1
2

3

4

5

6

Mono/ST

Mute

VOL.

Band

VOL.

Mode

Program/

Set

Mono/ST

Mute

VOL.

Band

VOL.

Mode

Program/

Set

Mono/ST

Mute

VOL.

Band

VOL.

Mode

Program/

Set

GB

Searching for and Storing the
Radio Stations

Selecting a Stored Station

Improving Radio Reception

Mode

Mode

5

4

3

4

2

2

3

3

3

EV-1(GB)-RDS 12/17/02 16:17 Page 15

Advertising
This manual is related to the following products: