Mp3-cd playback, Starting playback, Cd-r mp3 disc – Samsung 20041112183630062 User Manual

Page 11: Operations using the on-screen display, Repeating playback

Advertising
background image

MP3-CD Playback

19

This system has a built-in MP3 decoder.
You can play back MP3 tracks (files)recorded on CD-Rs, CD-RWs, and CD-ROMs.

It is recommended you turn on your TV when playing back an MP3-CD.

Starting Playback

Press the Open/Close( ) button

to load a disc.

1

After detecting the disc, playback starts.

The on-screen bar and the contents
recorded on the MP3-CD will be shown
on the TV if it is turned on.

Press the Play/Pause( ) button.

2

To stop during playback

Press the Stop ( ) button.

What is MP3?

MP3 is an abbreviation of Motion Picture Experts Group (or MPEG) Audio Layer 3.

MP3 is simply a file format with a data compression ratio of 1:10 (128 Kbps*). That means,by using MP3
format, one CD-R or CD-RW can contain 10 times as much data volume as a regular CD.

CD-R MP3 DISC

• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• The file name of the MP3 file may not be longer than 8 characters and should contain no blank spaces or special

characters.

• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc,

the disc can be played only up to the blank segment.

• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g.,

32Kbps ~ 320Kbps), the sound may skip during playback.

Depending on the recording mode, some MP3-CDs cannot be played.

20

Turn on your TV when playing back an MP3 disc.

Operations Using the On-Screen Display

When the loaded MP3 disc is recognized, the following
on-screen display appears on the TV screen.
(The contents of this on-screen display vary according to

the disc — the way MP3 tracks were recorded on the
disc.)

Button

To do

ENTER,

Start playback or go into a directory.

/

Select a track or directory.

On an MP3 disc, Repeat A

B cannot be used.

You can enjoy only repeat play.

Repeating Playback

Each time you press the button, repeat mode
changes as follows:

Press the REPEAT button.
The indication corresponding to the selected mode
appears on the TV screen.

REPEAT:RANDOM

: All tracks recorded on the disc will be played once in random order.

REPEAT:ONE

: Current track will be repeated.

REPEAT:DIR

: Tracks in the current directory will be repeated.

REPEAT:DISC

: All tracks on the disc will be repeated.

REPEAT OFF

: Repeat play is canceled.(Normal play is resumed.)

Your DVD player can also play CD-R and CD-
RW discs recorded in digital audio format.
When recording your own CD-R or CD-RW
discs, make sure that the recording session is
properly terminated, or they will not be
playable. (Depending on disc properties and
recording quality, some CD-R/RW may not be
playable.)

CD-RW has a lower reflection rate than CD-R
media and consequently it will take a longer to
read CD-R discs.

CD-RW discs recorded at high speed tend to
be difficult for the DVD player to read. If the
recording speed for the CD-RW disc is not
predetermined, write it at low speed.

CD-R/RW playback compatibility

Repeat

Advertising