Cleaning the coffee brewing unit (continued) – Sunbeam EM8910 User Manual

Page 36

Advertising
background image

34

• Dry the coffee brewing unit and turn the

service lever upwards again as far as it will

go. The ejection lever folds back again and

the brewing unit closes. See figure 55.

Inserting the coffee brewing unit
• Re-insert the coffee brewing unit as

follows:

1. Place the coffee brewing unit onto the

guide bar and push the coffee brewing unit
into the machine as far as it will go, see
figure 56.

2. Press the locking button down and push

the coffee brewing unit further in for
approximately 1cm until the locking
button clicks into place, see figure 57.

3. Press the locking lever down as far as it

will go, see figure 57.

• Close the service door and re-insert the

coffee waste container.

Note: The Sunbeam Intuitive Digital can only
be switched on if the service door is closed.
After switching on, the coffee brewing unit
re-adjusts itself, the normal heating process
starts again.

Figure 52

Figure 53

Figure 50

Figure 51

1

2

3

Cleaning the coffee brewing unit (continued)

Advertising