Sony DVP-NC650V - Manual (Page 58)

58
• DTS
When an LFE signal component is output,
“LFE” is enclosed in a solid line. When an
LFE signal component is not output, “LFE”
is enclosed in a broken line.
z When the signal contains rear signal components
such as “LS,” “RS” or “S,” the Surround effect is
enhanced (page 58).
SURROUND Mode Settings
You can enjoy surround sounds while
playing discs including Dolby Digital and
DTS DVDs, even if you have only 2 or 4
speakers. Select surround mode that best
suits your speaker setup.
1
Press DISPLAY during playback.
The Control Menu appears.
2
Press X/x to select
(SURROUND), then press ENTER.
The options for “SURROUND” appear.
3
Press X/x to select one of the
surround modes.
Refer to the following explanations given
for each item.
For 2 speaker setups
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD
L R C
DTS 3/2.1
PROGRAM FORMAT
LFE
LS RS
ENTER
X/x
DISPLAY
SURROUND
OFF
TVS DYNAMIC
OFF
1 8 ( 3 4 )
1 2 ( 2 7 )
T 1 : 3 2 : 5 5
1
DVD VIDEO
PLAY