Us ing v a ri ous additiona l fu nc tio n s, Controlling tvs with the remote – Sony DVP-NC650V User Manual

Page 73

Advertising
background image

73

Us
ing V

a

ri

ous

Additiona

l Fu
nc
tio

n

s

You will hear one beep and the Sound
Feedback function is turned on.

To turn off the Sound Feedback

function

When there is no disc in the player, press and
hold X on the player for more than two
seconds. You will hear two beeps and the
Sound Feedback function is turned off.

Controlling Your TV or AV
Amplifier (Receiver) with
the Supplied Remote

By adjusting the remote signal, you can
control your TV with the supplied remote.
If you connect the player with an AV
amplifier (receiver), you can control the
volume with the supplied remote.

Notes

• Depending on the units being connected, you may

not be able to control your TV or AV amplifier
(receiver) using some of the buttons below.

• If you enter a new code number, the code number

previously entered will be erased.

• When you replace the batteries of the remote, the

code number you have set may be reset to the default
setting. Set the appropriate code number again.

Controlling TVs with the remote

1

Slide the TV/DVD switch to “TV.”

2

Hold down ?/1, and enter your TV’s
manufacturer’s code (see the table)
using the number buttons.

3

Release ?/1.

1

2

3

4

5

6

7

8

9

0

TV/VIDEO

VOL +/–

?/1

TV/DVD
switch

WIDE MODE

Number
buttons

ENTER

continued

,

Advertising