Sony D-VM1 - Manual (Page 66)

66
Note
Depending on the DVD, “4:3 LETTER BOX” may be
selected automatically instead of “4:3 PAN SCAN” or
vice versa.
x PARENTAL CONTROL t
(DVD only)
Sets a password and playback limitation level
for DVDs with playback limitation for
children. For details, see “Limiting playback
by children (Parental Control)” (page 67).
x ANGLE MARK (DVD only)
appears for about 5 seconds when you
can change the angle.
x AUDIO DRC (Dynamic Range
Control) (DVD only)
Makes the sound clear when the volume is
turned down when playing a DVD that has
the “AUDIO DRC” function. This does not
affect the following output:
– output through an optical digital cord when
“DOLBY DIGITAL” is set to “DOLBY
DIGITAL”
– DTS audio output
Setting the digital output signal
Switches the method of outputting audio
signals when you connect the following
component using an optical digital cord via
the OPTICAL jack (AUDIO OUT jack).
– Amplifier (receiver) with digital input jack
– Amplifier (receiver) with a built-in DTS,
MPEG audio, or DOLBY DIGITAL
decoder
– MD or DAT deck
For connection details, see page 52.
The on-screen displays differ depending
upon the player model.
x DOLBY DIGITAL
Selects the Dolby Digital signals output via
the OPTICAL jack (AUDIO OUT jack).
ON Displays the angle mark.
OFF Does not display the angle mark.
16:9
4:3 LETTER BOX
4:3 PAN SCAN
STANDARD Normally, select this position.
TV MODE Makes the low sounds clear even
if you turn the volume down. It
is especially recommended
when you listen to the sound
using the speakers of the TV.
WIDE
RANGE Gives you the feeling of being at
a live performance. When you
use high quality speakers, it is
even more effective.
D-PCM Select this when the player is
connected to an audio component
lacking a built-in Dolby Digital
decoder.
CUSTOM SETUP
TV TYPE: 16:9
PARENTAL CONTROL:
ANGLE MARK:
ON
AUDIO DRC: STANDARD
DIGITAL OUT
DOLBY DIGITAL:
DTS:
D–PCM
MPEG: PCM
OFF