Troubleshooting, Reference r – Samsung DVD-P450 User Manual

Page 59

Advertising
background image

ENG-59

Reference

R

E F E R E N C E

Troubleshooting

Before requesting service (troubleshooting), please check the following.

No operations can be
performed with the
remote control.

The screen ratio
cannot be changed.

No audio.

Play mode differs from
the Setup Menu
selection.

Disc Menu doesn’t appear.

The icon appears
on screen.

Forgot password

The screen is blocked

If you experience other
problems.

5.1 channel sound is
not being reproduced.

Disc does not play.

• Check the batteries in the remote control.

They may need replacing.

• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several minutes to

drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.

• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.

• 5.1 channel sound is reproduced only when the following conditions are met. :

1) The DVD player is connected with the proper Amplifier
2) The disc is recorded with 5.1 channel sound.

• Check whether the disc being played has the “5.1 ch” mark on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?

• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.

• Check if the disc has a Menu.

• Some of the functions selected in the Setup Menu may not work properly if the

disc is not encoded with the corresponding function.

• The Screen Ratio is fixed on your DVDs.

• Make sure you have selected the correct Digital Output in the Audio Options

Menu.

• Press the

button for more than 5 seconds under no disc inside.

All settings will revert to the factory settings.

• Press the

button for more than 5 seconds under no disc inside.

All settings including the password will revert to the factory settings.
Don't use this unless absolutely necessary.

• Go to the contents and find the section of the instruction book that contains

the explanations regarding the current problem, and follow the procedure once
again.

• If the problem still cannot be solved, please contact your nearest authorized

service center.

• Make sure that the disc is not dirty or scratched.

• Clean the disc.

Action

Problem

Page

The picture is noisy or
distorted

P4

P7

P16

P51~52

P46~57

P53~54

P51~52

P17

P55~57

P2

00708C_P450_XSS_eng_2 2/26/05 10:46 PM Page 59

Advertising