Sharp CS-1194H User Manual

Page 7

Advertising
background image

– 5 –

NON-ADD / SUBTOTAL KEY:
Non-Add –
When this key is pressed right after entry of a number in the

Print mode, the entry is printed on the left-hand side with “#”.
This key is used to print out numbers not subject to
calculations such as codes, dates, etc.

Subtotal – Used to get subtotal(s) of additions and/or subtractions. When

pressed following

or

, the subtotal is printed with “

◊”

and the calculation may be continued.

By pressing this key even in the Non-print mode, the displayed
number is printed with “P”.

TOTAL KEY:
Prints the total of addition and subtraction with “

✱ ”.

This key also serves as a clear key for the calculation register and resets
an error condition.

CLEAR ENTRY KEY:
Clears numbers entered prior to use of a function key.
Also used to clear an overflow error caused by an entry.

FIRST RECALL MEMORY KEY

FIRST RECALL AND CLEAR MEMORY KEY

MULTIPLE USE KEY:
Performs mark-ups, percent change and automatic add-on/discount.

CHANGE SIGN KEY:
Changes the algebraic sign of a number (i.e. positive to negative or
negative to positive).

TAX-INCLUDING KEY:
This key is used for calculations with the tax/discount rate.

STORE KEY:
This key is used to store the tax/discount rate.
• A maximum of 4 digits can be stored (decimal point is not counted as a

digit).

• To store a discount rate, press

first.

• Only one rate can be stored. If you enter a new rate, the previous rate

will be cleared.

SECOND RECALL MEMORY KEY

SECOND RECALL AND CLEAR MEMORY KEY

02.5.15, 3:18 PM

Page 5

Advertising
This manual is related to the following products: