Sony BDPS360 - Manual (Page 27)

27
Ho
oku
p
s a
nd
Set
tings
1
While holding down TV [/1, enter the
TV’s manufacturer code using the
number buttons.
For instance, to enter “09,” press “0” then
“9.”
Code numbers of controllable TVs
If more than one code number is listed,
try entering them one at a time until you
find the one that works with your TV.
2
Release TV [/1.
Step 7: Easy Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
player. If you do not complete Easy Setup, it
will appear each time you turn on your
player.
Make the settings below in the following
order.
1
Turn on the TV.
2
Press [/1 to turn on the player.
The player turns on after a moment.
3
Switch the input selector on your TV so
that the signal from the player
appears on your TV screen.
The display for OSD language selection
appears.
• If the display for OSD language
selection does not appear
Press HOME, and select “Easy Setup”
in the “Setup” setup (page 53). Then,
select “Start,” and press ENTER.
Manufacturer Code number
Sony 01 (default)
Hitachi 02
LG/Goldstar 04
Mitsubishi/MGA 13
NEC 04
Panasonic 19
Philips 21
Pioneer 16
RCA 10
Samsung 20
Sharp 18
Toshiba 07
When turned on for the first time
Wait for a short while before the player
turns on and starts Easy Setup.
[/1
</M/m/,,
ENTER
HOME
TV [/1
,continued