Sony BDPS360 - Manual (Page 20)

20
If your AV amplifier (receiver) has an HDMI input, use this connection. You can enjoy higher
quality sound from the connected AV amplifier (receiver).
To enjoy 7.1 channel sound, use a High Speed HDMI cable.
If you connect a Sony AV amplifier (receiver) that is compatible with the “Control for HDMI”
function (page 16), refer to the operating instructions supplied with the AV amplifier (receiver).
1
Connect the HDMI OUT jack of the
player and your AV amplifier
(receiver).
2
Set “BD Audio Setting” to “Direct” in
the “Audio Settings” setup (page 45).
To enjoy the secondary audio
(commentary), set “BD Audio Setting”
to “Mix.”
z
Check the following settings:
– “Audio Output Priority” is set to “HDMI” in the
“Audio Settings” setup (page 44).
– “Audio (HDMI)” is set to “Auto” in the “Audio
Settings” setup (page 44).
b
Not all HDMI-compatible AV amplifiers
(receivers) accept 8ch Linear PCM signals. Refer as
well to instructions supplied with the connected AV
amplifier (receiver).
Connecting to an HDMI jack
AV amplifier (receiver)
Blu-ray Disc/DVD player
HDMI cable (not supplied)
TV
HDMI cable (not supplied)