Sony DVW-2000 - Manual (Page 113)

Chapter 12
Setup Menus
Chapter 12 Setup Menus
12-7
Item number
023
029
B01
B02
B03
B11
B12
B13
B20
Item name
LOCAL KEY MAP
1 STOP
2 PLAY
3 REC/EDIT
4 STANDBY
5 EJECT
6 JOG
7 SHUTTLE
8 VAR
9 FF/REW
10 PREROLL
11 AUTO/PRE/REVIEW
12 F-KEY
13 AUDIO/MONITOR
14 EDIT PRESET
15 OTHERS
STORED OWNERSHIP
RECALL BANK 1
RECALL BANK 2
RECALL BANK 3
SAVE BANK 1
SAVE BANK 2
SAVE BANK 3
RESET SETUP
Settings
When MAP is selected in menu item 006, the buttons that can be operated on the
control panel of this unit when it is being controlled by remote control from
another device can be selected from the following sub-items.
The settings of each sub-item are as follows.
DIS : Do not function.
ENA: Function.
Select whether the STOP button functions.
Select whether the PLAY button functions.
Select whether the REC and EDIT buttons function.
Select whether the STANDBY button functions.
Select whether the EJECT button functions.
Select whether the JOG button functions.
Select whether the SHUTTLE button functions.
Select whether the VAR button functions.
Select whether the F FWD and REW buttons function.
Select whether the PREROLL button functions.
Select whether the AUTO EDIT, PREVIEW, REVIEW buttons function.
Select whether the F1 to F6 buttons function.
Select whether the audio signal buttons function.
Select whether the EDIT PRESET button functions.
Select whether the ENTRY, IN, OUT, AUDIO IN, AUDIO OUT, TRIM+, TRIM–,
GS-MARK, GS-LIST, DELETE, and DMC EDIT buttons function.
Select whether or not to set the Stored Ownership UMID item.
off : Do not set.
on: Set.
To set Stored Ownership, display this item in the menu display section, and press
the F5 (SET) button to move to the Stored Ownership setting screen.
For details, see the section “To set Stored Ownership” (page 8-2).
Set to ON to recall menu settings from menu bank 1.
Set to ON to recall menu settings from menu bank 2.
Set to ON to recall menu settings from menu bank 3.
Set to ON to save current active menu settings to menu bank 1.
Set to ON to save current active menu settings to menu bank 2.
Set to ON to save current active menu settings to menu bank 3.
Set this item to ON to return the current menu settings to the factory defaults.
Set it to bank-4 to use the contents of menu bank 4 as the current menu settings.
For details about menu bank 4, refer to the Maintenance Manual.
Sub-item