Sony DVW-2000 - Manual (Page 74)

6-3 Shot Mark Operations
Chapter 6
Shot Mark Function
6-4
Chapter 6 Shot Mark Function
To write in crash recording or assemble
editing
1
Hold the MARK button down for at least 2
seconds.
2
At the position you wish to write the mark, hold
down the ENTRY button, and press the MARK
button.
A mark of the type selected in item G04 of the shot
mark operation menu is written.
Writing during playback, while stopped, or
during a search
When this unit is in any of the playback, stop, or
search modes, you can write a post mark only.
1
Hold the MARK button down for at least 2
seconds.
The REC/ERASE indicator lights.
2
At the position you wish to write the mark, hold
down the ENTRY button and press the MARK
button.
A post mark is written the instant you pressed the
MARK button.
While the mark is being written, the message
“RECORD SHOT MARK” appears on the
monitor, and the REC/ERASE indicator flashes.
Erasing a shot mark
Select the shot mark from the shot mark list, and then
carry out the deletion operation.
For details of the procedure, see page 6-6.
6-3-3 Shot Mark List Operations
Displaying the shot mark list
Hold down the ENTRY button and press the LIST
button.
All of the shot mark types for which item G02 in the
shot mark operation menu is set to “ON” appear in the
list. If you do the same operation again, the list display
disappears.
While the shot mark list is displayed, the function
menu display changes as follows.
SETING EXIT MEMO SELECT DELETE
SHT
MRK
Z
ENTRY button
LIST button
Z
REC/ERASE indicator
ENTRY button
MARK button