Samsung YP-F2X - Manual (Page 51)

Chapter 4. Settings
51
Settings
Setting the System You can set the Default Volume, Resume and Beep Sound
functions.
1
Press and hold the [ USER/ MENU] button to
move to the menu screen.
2
Press the [ + , - ] button to select <Settings>
and then press the [
USER/ MENU] button.
■ The Settings menu appears.
3
Press the [ + , - ] button to select the <System>
and then press the [
USER/ MENU] button.
■ The Sytem menu appears.
4
Use the [ + , - ] and [ USER/ MENU] buttons to
set necessary functions.
■ <Delete File> : Search and delete files in the Navigation screen. √ Page 51
■ <Resume> : Specifies the starting point to restart playback after the music you are listening to
is stopped. If set to <Off>, the last file listened to will play from the beginning. If set to <On>, the
last file listened to will play from the point where last played.
■ <Beep> : Sets the beep sound for button operations to on or off. Select either <On> or <Off>.
■ <Default Vol> : The default volume can be set 00 to 30(Max). If the power is turned on again
after adjusting the volume above the default volume, music is played at default volume.
If the power is turned on again after the volume was set within the default volume, the music is
played at the previously played volume.
■ <Default Set> : Returns all settings to the default value. √ Page 51
■ <About> : Checks the firmware version, number of stored files, remaining memory.
■ Regarding the Built-In Memory
The actual built-in memory available is slightly less than indicated as the internal firmware uses a portion
of the memory. NOTE
Setting Language/ Setting the System