Samsung CL-29M30HS - Manual (Page 26)

O
P E R AT I O N
English - 26
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH and
CH buttons to scan through the channels. This eliminates the need to change
channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and
deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button.
Press the ▲ or ▼ button to
select “Channel”, then press the
ENTER button.
2
Press the ▲ or ▼ button to
select “Air/CATV”.
3
Press the œ œ or √ √ button to
select “Air” (antenna), “STD”,
“HRC”, or “IRC” (all cable TV).
Move Enter Return
Channel
Auto program √ √
Add/Delete √ √
Fine tune : 00
Air/CATV : Air
Name : - - - -
Move Adjust Return
Channel
Auto program √ √
Add/Delete √ √
Fine tune : 00
Air/CATV œ œ Air √ √
Name : - - - -
Move Adjust Return
Channel
Auto program √ √
Add/Delete √ √
Fine tune : 00
Air/CATV œ œ Air √ √
Name : - - - -
œ STD, HRC and IRC identify
various types of cable TV
systems. Contact your local cable
company to identify the type of
cable system that exists in your
particular area.
continued...
AA68-03681B-01Eng(Latin) 2/7/06 10:45 AM Page 26