Samsung BSD-3007 - Manual (Page 17)

a.
b.
c.
d.
Setting Date, Time
and Personalized Levels
16 Setting Date, Time and Personalized Levels
Setting date and time
Press "MODE" button ("month" starts flashing)
Press "[
]" and "[ ]" button to set and adjust the correct month
(1, 2, 3 ....12)
Press "MODE" button again ("date" starts flashing)
Press "[
]" and "[ ]" button to set and adjust the correct date
Press "MODE" button again ("hour" starts flashing)
Press "[
]" and "[ ]" button to set and adjust the correct hour in
12-hour format. A "PM" will appear for PM and disappear for AM.
Press "MODE" button again ("minute" starts flashing)
Press "[
]" and "[ ]" button to set and adjust the correct minute
(00, 01, 02 ...59)
Before setting your levels it is important to know:
*Your systolic rate is set between 70 and 250 mmHg.
*Your diastolic rate is set is between 40 and 115 mmHg.
*If the batteries have run down or are removed or the adapter has
been unplugged, the time and date will have to be reset.
After setting the minute you will automatically be prompted to set the
personalized level for Memory Zone 1. The storage of 180 memory
readings is divided into 2 memory zones, each maintaining up to 90
memory readings. The following explains how to set your personal-
ized level in each zone.
Your personalized level should be decided between you and
your healthcare provider.