Samsung BSD-3007 - Manual (Page 21)

20 Storing, recalling, and erasing measurement data
Storing, recalling, and erasing
measurement data
Storing data
After each measurement, the systolic and diastolic rates, pulse
rate and the time & date will be automatically stored.
* The memory holds data for the latest 90 measurements in each of
2 memory zones. If more than 90 measurements are entered, the
memory will automatically clear out the oldest data.
Recalling data
a. Press the " " or " " button to select the memory zone.
b. Press the "MEMORY" button to get your stored memory data.
* If there is no data in the memory nothing will appear.
* If there is data in the memory, the first reading will
be an average of the last three recorded set of
measurements (systolic and diastolic pressure
and pulse rate). See symbol "A" on the screen.
c. Press the "MEMORY" button again and the latest
recorded set of measurements will appear along
with the recording time and date. Memory number
will appear on the left lower side of the screen.
- See picture No. "80" on the screen.
d. Press the " " button to read the next set of stored data.
The data displayed starts with the most recent reading and
continues backwards to the oldest.
* If your memory readings are above of your personal Alert
levels, the reading results will be flashing, or a smile face will
be displayed.
* No Irregular Heartbeat Detector Record will be stored in
memory.