Sony 55HX92X - Manual (Page 14)

14 GB
6: Bundling the cables
~
• Before bundling the cables, remove the cable
holder from the AC cover (see step 1 and 2).
Reuse the cable holder (see step 3) to bundle the
other cables (see step 4).
• Do not bundle the AC power cord (mains lead)
together with other cables.
* When installing on the wall, attach the cable
holder under the terminals.
7: Performing the initial set-
up
1
Connect the TV to your AC power
outlet (mains socket).
2
Check the ENERGY SAVING switch
setting is on (
z
).
3
Press 1 on the TV. The = (power)
indicator will light up in green.
When you switch on the TV for the first
time, the Language menu appears on the
screen.
~
• When you turn on the TV for the first time, the
TV requires some internal processing for
optimization before you can perform the
initial setup. There will be no picture and
sound, and the timer indicator on the front of
the TV blinks orange for about 40 seconds. Do
not turn off the TV during this process.
This process has been completed at the factory
for some TVs.
Follow the instructions on the screen.
Digital Auto Tuning: When you select
“Cable”, we recommend that you select
“Quick Scan” for quick tuning. Set
“Frequency” and “Network ID” according
to the information supplied from your cable
provider. If no channel is found using
“Quick Scan”, try “Full Scan” (though it
may take some time).
3
1 2
2 1
3
3
4
4
*
KDL-60/55/46/40NX72x, KDL-55/46HX92x,
KDL-55/46HX82x
KDL-65HX92x
4