Product information (image retention free) – Samsung 275TPLUS User Manual

Page 11

Advertising
background image

PRODUCT INFORMATION (Image Retention Free)

LCD Monitors and TVs may have an image retention when switching from one image to another
especially after displaying a stationary image for a long time.

This guide is to demonstrate a correct usage of LCD products in order to protect them from
Image retention.

Warranty

Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.

What is Image retention ?

During normal operation of a LCD panel, pixel image retention doesn't occur. However,

if the same image is displayed for a long time, a slight difference in electric charge
accumulates between the two electrodes which encase the liquid crystal. This may
cause the liquid crystal to build up in a certain areas of the display. Thus, the previous

image is retained when switching to a new video image. All display products, including
LCD,are subject to image retention. This is not a product defect.

Please follow the suggestions below to protect your LCD from image retention

Power Off, Screen Saver, or Power Save Mode

Ex)

z

Turn the power off when using a stationary pattern.

z

Use a Screen saver if possible

z

Set the Monitor to power off with the PC Display Properties Power Scheme.

- Turn the power off for 4 hours after 20 hours in use

- Turn the power off for 2 hours after 12 hours in use

- Screen saver in one color or a moving image is recommended.

Suggestions for specific applications

Ex) Airports, Transit Stations, Stock Markets, Banks, and Controlling Systems
We recommend that you follow set up of your display system program as below:



Display Information together with Logo or Moving image cycle.

Ex) Cycle : Display Information for 1 hour followed by a
Display Logo or moving image for 1 minute.


Change the Color Information periodically (Use 2 different colors).

Ex) Rotate the Color Information with 2 colors every 30 minutes.

Avoid using a combination of characters and background color with large

difference in luminance.
Avoid using Grey colors, which can cause Image retention easily.

z

Avoid: Colors with big difference in luminance (Black & White, Grey)

Ex)

z

Recommended settings: Bright colors with little difference in luminance

- Change the characters color and background color every 30 minutes
Ex)

- Every 30 minutes, change the characters with movement.

Advertising
This manual is related to the following products: