Samsung ITP-5112L - Manual (Page 56)

CUSTOMIZING YOUR KEYSET
AME PASSWORD
This feature allows people using the AME feature to enable password protection.
This will prevent unauthorized people from listening to your messages being left.
The passcode is the same as your station passcode. This feature only applies if
there is a SVMi card installed in the system and your keyset has a programmed
AME button.
• With the handset on-hook, press TRANSFER and then dial 110.
• Dial 101 to turn on AME PASSCODE or 100 to turn it off.
• Press TRANSFER to store your selection.
From the LCD:
• Press MENU button.
• Scroll to SETUP option and press ENTER.
• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 and
immediately enter the option.
• Scroll to AME password and press ENTER to change status.
• Press CANCEL to return to the Main Option Page—OR—press END to return
to the idle screen.
AUTO CAMP-ON
This option allows intercom calls to be automatically camped on, if possible, when
a busy station is called.
• With the handset on-hook, press TRANSFER and then dial 110.
• Press 081 to turn CAMP-ON on or 080 to turn it off.
• Press TRANSFER to store your selection.
From the LCD:
• Press MENU button.
• Scroll to SETUP option and press ENTER.
• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 and
immediately enter the option.
• Scroll to AUTO CAMP-ON and press ENTER to change status.
• Press CANCEL to return to the Main Option Page—OR—press END to return
to the idle screen.
49
5112l_guide.qxp 5/9/2006 9:19 AM Page 55