Select ring tone, Change your passcode – Samsung ITP-5112L User Manual
Page 57
50
SELECT RING TONE
Each ITP-5112L user can select from a variety of ring tones.
From the LCD:
•
Press MENU button.
•
Scroll to SOUND/SCREEN option and press ENTER.
•
Scroll to RING TONE SELECT and press ENTER—OR—you may dial 1 and
immediately enter the option.
•
Select from one of the three categories:
1.
Standard Ring Tones
2.
Melody or
3.
My Ring Tones
•
Press ENTER to select. Use LEFT/RIGHT arrow buttons to scroll through the
available ring tones and press ENTER to SAVE.
•
Press CANCEL to return to the Main Option Page—OR—press END to return
to idle screen.
CHANGE YOUR PASSCODE
From the factory, your station passcode is 1234. You can change your station pass-
code whenever you desire.
•
While on-hook, press TRANSFER and then dial 101.
•
Dial your old passcode.
•
Dial a new passcode (must be four characters). You can use 0–9.
•
Redial the new passcode to verify. If successful, you will hear two beeps. Four
beeps indicate an incorrect code. Reenter the code again.
•
Press TRANSFER to store the new passcode.
From the LCD:
•
Press MENU button.
•
Scroll to MY PHONE option and press ENTER.
•
Scroll to CHANGE PASSWORD and press ENTER—OR—you may dial 3 and
immediately enter the option.
•
Enter CURRENT PASSWORD, press ENTER.
•
Enter NEW PASSWORD and press ENTER.
•
Enter NEW PASSWORD again, for confirmation and press ENTER.
•
Press CANCEL to return to the Main Option Page—OR—press END to return
to idle screen.
5112l_guide.qxp 5/9/2006 9:19 AM Page 56