Samsung ITP-5112L - Manual (Page 61)

• With the handset on-hook, press TRANSFER and then dial 110.
• Dial 061 to turn ring preference on or 060 to turn it off.
• Press TRANSFER to store your selection.
From the LCD:
• Press MENU button.
• Scroll to SETUP option, press ENTER.
• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 and imme-
diately enter the option.
• Scroll to RING PREF, press ENTER to change option status.
• Press CANCEL to enter change and return to Main Configuration Menu—
OR—press END to return to idle screen.
AUTO ANSWER CO CALLS
This option will allow CO calls that directly ring your phone to auto answer. When
a CO call arrives at your station and this option set for ON your phone will sound
two beeps, the same as when a screened transfer is completed, and you will be
connected to the CO call. In order for this option to work the station must also be
programmed for auto answer (see Set Answer Mode).
• Press MENU button.
• Scroll to SETUP option, press ENTER.
• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 and imme-
diately enter the option.
• Scroll to AUTO ANS CO CALL, press ENTER to change option status.
• Press CANCEL to enter change and return to Main Configuration Menu—
OR—press END to return to idle screen.
NOTE: Outside lines must ring your station directly for the Auto Answer CO to
work. Lines ringing a station group will not cause your phone to Auto Answer the
call.
DISPLAY SPEED DIAL NAME
This option allows you to view the name associated with a speed dial number as
it is dialed.
• With you handset on-hook, press TRANSFER and then dial 110.
• Press 111 to turn DISP SPDNAME on or 110 to turn it off.
• Press TRANSFER to store your selection.
From the LCD:
• Press MENU button.
• Scroll to SETUP option, press ENTER.
54
5112l_guide.qxp 5/9/2006 9:19 AM Page 60