Samsung ITP-5112L - Manual (Page 69)

CALLER ID
SELECTING YOUR CALLER ID DISPLAY
You can decide if you want to see the Caller ID name or Caller ID number in the
display. Regardless of which one is selected, you can press the NND button to view
the other pieces of Caller ID information. To select the type of Caller ID informa-
tion you wish to view first.
• With the handset on-hook, press TRANSFER and then dial 119.
• Dial 0 for CID options, 1 for ANI options, or 2 for CLI options.
• Dial 0 if you do not wish to view CID information, 1 to view the NUMBER first
or 2 to view the NAME first.
• Press TRANSFER to exit and store your selection.
VIEWING THE NEXT CALLER ID CALL
In the event that you have a call waiting or a camped-on call at your keyset, you
can press the NEXT button to display the Caller ID information associated with
the call in queue at you keyset. Either the CID name or CID number will show in
the display depending on you Name/Number selection.
To view Caller ID information for calls that have been camped-on to your keyset,
press the NEXT button.
SAVING THE CALLER ID NUMBER
At any time during an incoming call that provides CID information, you may press
the SAVE button to save the CID number. The system must be using LCR to dial
the saved number.
REDIALING A SAVED CALLER ID NUMBER
To redial a number that has been saved, press the SNR button or dial 17.
NOTES:
1.
Your telephone system must be LCR correctly programmed to redial the
saved number.
2. If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin.
62
5112l_guide.qxp 5/9/2006 9:19 AM Page 68