Samsung Version 2.1 - Manual (Page 25)

Link Settings OfficeServ Link Version 2.1 User Guide
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
© SAMSUNG Electronics Co., Ltd. Page 25
Note The Link will not accept any client connection requests without a valid license.
To get the valid license key, Contact the Authorised Samsung Reseller.
Message Auto Clear Option.
During Operation the Link shows various status messages on the status message bar
placed at the bottom of the Window. If enabled, the maximum number of message lines
retained can be set in this field. (selected from a range of 100 to 9999). If disabled, a
maximum of 9999 lines is specified. If the number of message lines exceeds the maximum,
the additional lines will be deleted.
Note We recommend that you enable the message Auto clear option, and set the number of lines to a
low setting during normal use. If you specify a high value, the performance of Link may be
affected.
Automatic connection to PBX system at Link startup
When the communication environment has been set up and the Link has been normally
connected to the telephone system, this option allows you to make the Link connect
automatically to the telephone system on application startup.
This is recommended for normal use.
Note When the Link has been linked to Startup folder during installation, and this option is selected,
the Link will run automatically when the computer is started, and the Link will automatically
attempt to connect to the telephone system.
If you need to change the communication environment, or are reconfiguring the system, this
option should be deactivated before restarting.
Message Monitoring and Saving Option
The Link has the ability of transmitting internally processed messages to an external
monitoring program. This monitoring program is installed together with Link software. In
addition, if you install the additionally provided monitoring program, you can also monitor the
messages that are currently processed via LAN on the other computers.
General message monitoring option settings
A general message means a call-processing message that is transmitted and received
between Link and the telephone system. The Link transmits the currently exchanged general
message to the general message-monitoring program, and the monitoring program shows
you the received message. It also provides a Save function.
The General message monitoring program, [Switch Message Monitor] is installed when Link
software is installed.