Samsung CD Player - Manual (Page 11)

No additional device driver is needed for Windows 98/2000/ME/XP/NT4.0, as the default Windows device
driver is used. You can check that the COMBO drive has been correctly detected by Windows. To do so,
proceed as follows.
The SAMSUNG device driver enables discs in the COMBO drive to be read but not recorded in an MS-DOS
environment; the driver is located in the D driver folder on the CD record utility disc.
Store the utility disc in a safe place.
Installing the Device Driver
Double-click on the My Computer icon on your desktop.
Double-click on the Control Panel folder.
Double-click on the System icon.
Click on the Device Manager tab.
Expand the CD-ROM branch.
The SAMSUNG COMBO SM - *** device name is displayed.
Setting Up the Device Driver
Automatic Setup
The device driver is located in the Ddriver folder of the CD Record Utility disc which is provided in the
package.
Insert the CD Record Utility disc into the CD-ROM drive and open the Ddriver folder.
Run the CDSETUP.EXE file in the Ddriver folder.
When Setup is successfully completed, click OK button or press the Enter key.
Reboot the computer.
Manual Setup
Make the C:\SAMSUNG directory.
Copy the files from the diskette to the C:\SAMSUNG directory.
To do so, type COPY D:\Ddriver * . * C:\SAMSUNG after the C:\prompt and press [Enter].
Edit the CONFIG.SYS file.
Add the DEVICE=C:\SAMSUNG\SSCDROM.SYS \D:SSCD000/V entry.
Edit the AUTOEXEC.BAT file.
Add the C:\SAMSUNG\MSCDEX/D:SSCD000 entry.
Reboot the computer.
To record data on a CD-R or CD-RW disc in the COMBO drive, you must first install the CD record utility. For
compatibility reasons, you are recommended to uninstall any existing software of the same type before
installing this utility.
Installing the CD Record Utility
Insert the disc supplied with the COMBO drive in the drive.
Follow the instructions displayed on the screen to install the utility.
Refer to the separate utility documentation for further details.
Setup
English - 12