Smeg SC112 User Manual
Smeg Microwaves
3
Table of contents
INSTRUCTIONS FOR THE USER: these specify usage
recommendations, and describe the commands and the correct
cleaning and maintenance operations for the appliance
INSTRUCTIONS FOR THE INSTALLER: these are intended for the
qualified technician who will carry out the installation, operation and
testing of the appliance
1.
INSTRUCTIONS FOR USE .............................................. 4
2.
SAFETY INSTRUCTIONS ................................................ 5
3.
INSTRUCTIONS FOR DISPOSAL – OUR
ENVIRONMENTAL CARE ................................................ 6
4.
GET TO KNOW YOUR OVEN .......................................... 7
5.
BEFORE INSTALLATION................................................. 7
6.
AVAILABLE ACCESSORIES ............................................ 8
7.
USING THE OVEN ........................................................... 9
8.
COOKING WITH THE OVEN ......................................... 20
9.
CLEANING AND MAINTENANCE.................................. 30
10. EXTRAORDINARY MAINTENANCE .............................. 35
11. INSTALLING THE APPLIANCE ...................................... 42
Document Outline
- 1. INSTRUCTIONS FOR USE
- 2. Safety instructions
- 3. Instructions for disposal - Our environmental care
- 4. GET TO KNOW YOUR OVEN
- 5. Before installation
- 6. AVAILABLE ACCESSORIES
- 7. using the oven
- 7.1 General Description
- 7.1.1 Oven racks
- 7.1.2 Cooling system
- 7.1.3 Inside light
- 7.5.1 Setting the current time
- 7.6.1 Cooking with preset temperature
- 7.6.2 Changing the preset temperature
- 7.6.3 Using the minute minder
- 7.7.1 Semiautomatic cooking
- 7.7.2 Automatic cooking
- 7.8.1 Modifying the data set (during cooking)
- 7.8.2 Automatic cooking with a recipe
- 7.8.3 Selecting a recipe permanently
- 1 From ON status, select the recipe to modify with PT2. Within 5 seconds of the selection, hold down PT1 for at least 2 seconds. The symbol flashes indicating the recipe modification phase.
- 2 Now, by turning PT1, you can modify the cooking function to associate to the recipe being modified. Press PT1 to confirm.
- 3 Setting the temperature. The preset temperature will be displayed on DSP2 flashing; press PT1 to modify it. Press PT1 to confirm.
- 4 Modifying the cooking duration. The preset cooking duration will be displayed on DSP1 flashing. Turning PT1 you can modify it. Press PT1 to confirm.
- 5 Modifying the recommended runner. The recommended runner will flash; turning PT1 you can modify the number. Press PT1 to exit the programming, the symbol will stop flashing.
- 7.9 Table of predefined recipes:
- 7.10 Secondary menu
- 8. cooking with the oven
- 9. CLEANING AND MAINTENANCE
- 10. EXTRAORDINARY MAINTENANCE
- 11. INSTALLING THE APPLIANCE