Video and audio commands – Smart Technologies SMART Hub SE240 User Manual
Page 27
21 |
CHAPTER 2 – CONFIGURING YOUR HUB
Video and Audio Commands.
Command Description
set brightness {+ or -}
Increases or decreases the brightness in
increments.
set brightness
{0 – 100}
Sets the brightness to an absolute value from 0 (off)
to 100 (full brightness).
get brightness
Requests the hub’s current brightness setting.
set contrast {+ or –}
Increases or decreases the contrast in increments.
set contrast {0 – 100}
Sets the contrast to an absolute value from 0
(minimum contrast) to 100 (maximum contrast).
get contrast
Requests the hub’s current contrast setting.
set volume {+ or -}
Increases or decreases the volume in increments.
set volume {0 – 30}
Sets the volume to slightly audible mode.
get volume
Requests the hub’s current volume setting.
set mute {on or off}
Turns your hub’s mute feature on and off.
get mute
Requests the current mute setting.
set display {on or off}
Turns the display’s video output feature on and off.
set timeout {0, 5, 10, 30 or 60} Modifies the sleep setting.
NOTE
Setting it to 0 turns sleep mode off.
factory reset
Resets the settings to factory defaults.
type ?
Requests a list of commands.