Exporting and importing configuration – Smart Technologies SMART Hub SE240 User Manual
Page 37
31 |
CHAPTER 2 – CONFIGURING YOUR HUB
Exporting and Importing Configuration
If you have more than one hub, you can configure one unit, export the configuration
settings to a USB storage device, and then import the configuration settings to the
other units.
NOTES
•
Procedures vary depending on whether you have a SMART Hub SE240 or a
SMART Hub VE220.
•
The export process doesn’t include orientation data on the USB
storage device.
To export configuration
settings to a USB
storage device
1. Connect a USB storage device to your hub.
2. Select System > Settings.
NOTE
If a is required to change the configuration settings, type the in the box at the
bottom of the menu, and then press OK.
3. Press Administration, and then ensure the Enable USB storage device support
check box is selected.
4. Press Export Settings.
The Settings dialog box appears.
5. Select either the SMART Hub SE240 system settings check box or the SMART
Hub VE220 system settings check box.
6. Select the E-mail Contacts check box to import/export contacts.
7. Press OK, and then press OK again.