Sony CMT-CQ1 - Manual (Page 8)

8 GB
Other operations
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press CD
N. However, the program is cleared when you open
the disc tray.
• If you select “CD AL” in step 3, you can select all
tracks on the disc at once.
You can preset up to 20 FM stations and 10 AM
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
Use buttons on the remote for the operation.
Automatic tuning preset
You can automatically tune in all of the stations
that can be received in your area and then store
the radio frequency of the desired stations.
1
Press TUNER BAND repeatedly to
select FM or AM.
2
Press TUNING MODE repeatedly until
“AUTO” and the frequency appear in
the display.
3
Press TUNING +/–.
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
“TUNED” and “STEREO” (for stereo
program only) appear.
If “TUNED” does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in steps 2 through 6 of
“Manual tuning preset” (page 9).
4
Press TUNER MEMORY.
The preset number flashes. The stations are
stored from preset number 1.
To Do this
Check the program
order Press ./> repeatedly
during program play.
Cancel Program
Play Press PLAY MODE on the
remote in stop mode repeatedly
until both “PGM” and “SHUF”
disappear.
Add a track to the
end of the program Perform steps 1 – 4 in stop mode.
Erase the program Press CLEAR on the remote in
stop mode. Each time you press
the button, a track is cleared from
the end of the program.
Tuner
Presetting radio stations
Preset number