Samsung CT-20H4 - Manual (Page 12)

12
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
INPUT
OUTPUT
VIDEO AUDIO 75
▼
1
Plug the incoming cable
into the VHF/UHF antenna
terminal on back of the TV.
Because this TV is cable-ready,
you do not need a cable box to view
unscrambled cable channels.
INPUT
OUTPUT
VIDEO AUDIO 75
VE
VHF
UHF
2
Plug the combiner into the
VHF/UHF terminal on the
bottom of the rear panel.
I
N S TA L L AT I O N
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires a an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna
leads to the combiner.
Antennas with 75-ohm Round Leads
1
Plug the antenna lead into
the VHF/UHF
terminal on the bottom of
the back panel.
INPUT
OUTPUT
VIDEO AUDIO 75
02825A(E)-CHAPTER 2 6/16/03 4:06 PM Page 12