Samsung ML-2550 Series - Manual (Page 199)

U SING Y OUR P RINTER ON A N ETWORK E.6
Configuring Network Parameters on the
Control Panel
Supported Operating Systems
• IPX/SPX: Internet Packet exchange/Sequenced Packet eXchange
• TCP/IP: Transmission Control Protocol/Internet Protocol
• DLC/LLC: Data Link Control/Logical Link Control
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol
Printing a Network Configuration Page
The Network Configuration page shows how the network
interface card on your printer is configured. The default settings
enabled all parts which are suitable for most applications.
1 In ready mode press the Menu button ( ) until you see
“Network” on the bottom line of the display.
2 Press the Enter button ( ) to access the menu.
3 Press the scroll button ( or ) until “Print Net CFG”
displays on the bottom line.
4 Press the Enter button ( ).
The Network Configuration page prints out.
Item Requirements
Network Interface 10/100 Base-TX (standard for ML-2551N
and ML-2552W) or 802.11b Wireless LAN
(standard for ML-2552W)
Network Operating
System • Novell NetWare 3.x, 4.x, 5.x
• Windows 95/98/Me, NT 4.0/2000
/XP
• Unix AT&T, BSD4.3, HP-UX, SUN OS,
SOLARIS, SCO
• Linux RedHat 6.0
• Macintosh OS 8.6~9.2/10.1~10.3
Network Protocols • Netware IPX/SPX
• TCP/IP, DLC/LLC on Windows
• Port9100 on Windows NT, Unix, Linux
• Apple EtherTalk (802.3)
Dynamic Addressing
Server • DHCP, BOOTP