Sharp VC-MH715HM - Manual (Page 14)

10
www.sharp.co.uk/support
BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
• For double speed playback (without sound), press the PLAY/X2 button again.
• To revert to normal playback, press the PLAY/X2 button again.
• To stop the video tape, press STOP .
• To eject the tape press EJECT on the VCR.
SHARP SUPER PICTURE
SHARP SUPER PICTURE should enhance the picture quality during playback. It is
normally set to ON. To turn SHARP SUPER PICTURE on or off press SUPER P.
on the VCR front panel.
PICTURE DISTURBANCE DURING PLAYBACK
This VCR has an automatic tracking system which reduces picture disturbance when you start
to playback a video tape. When auto-tracking is in operation flashes on the on-screen
display. If the picture still has disturbance you may need to manually track the video tape:
During PLAYBACK of a video tape.
• Press CHANNEL or to position picture interference off the TV screen.
(Manual Tracking)
• Press CHANNEL and buttons together to start Auto Tracking.
PAUSING AND SLOW MOTION
1. Press the PLAY/X2 button to start the video tape
playing.
2. To pause the video tape, press PAUSE/STILL .
• To minimise jitter whilst in pause mode press CHANNEL
or .
• Press the PLAY/X2 button to resume playback.
3. To playback in slow motion (without sound) press the SLOW button on the remote
control. Slow motion speed can be adjusted using the or buttons next to the slow
button. Picture disturbance can be improved by using the CHANNEL or
during slow motion playback.
• Press the PLAY/X2 button to resume playback.
NOTES:
• When using SLOW MOTION function some mechanical noise may be heard.
• There will be picture interference and possibly a change to black and white picture
using Pause and Slow functions.
• PAUSE mode will disengage after about 5 minutes.
PLAY / X2
PLAY / X2
SUPER P.
DPSS
SLOW
TAPE
SPEED
TV/VCR
REC PAUSE/STILL
REW FF
PLAY / X2
STOP
PLAY / X2
PLAY / X2
PLAY / X2
REMOTE CONTROL
TINS-A079UMN1.book Page 10 Monday, November 4, 2002 1:01 PM