Sony UWA-BR100 User Manual

Usb wireless lan adapter uwa-br100

Advertising
background image

USB Wireless LAN Adapter UWA-BR100

4-170-221-15(1)

English

Operating Instructions

Before Use

Safety and Regulatory

Pursuant to FCC regulations, you are

cautioned that any changes or modifications

not expressly approved in this manual could

void your authority to operate this equipment.
To prevent radio interference to the licensed

service, this device is intended to be operated

indoors and away from windows to provide

maximum shielding. Equipment (or its

transmit antenna) that is installed outdoors is

subject to licensing.
Only use Wireless LAN indoors when using it

with IEEE 802.11a/n (5 GHz).
High power radars are allocated as primary

users (meaning they have priority) of 5250-

5350 MHz and 5650-5850 MHz and these

radars could cause interference and/or damage

to this device.

This device uses 5 GHz band for wireless LAN

communication and the maximum gain of the

antenna in this device is 6 dBi.
This equipment complies with FCC/IC

radiation exposure limits set forth for an

uncontrolled environment. This equipment

should be installed and operated with

minimum distance 20 cm between the radiator

and your body (excluding extremities: hands,

wrists and feet).
This device and its antenna(s) must not be co-

located or operating with any other antenna or

transmitter except Grant condition.

For Your Convenience

Please contact Sony Customer Support
directly if you:

Have questions on the use of your USB

Wireless LAN Adapter after reading

your Operating Instructions Manual

Experience difficulty operating your

USB Wireless LAN Adapter

For United States
http://www.sony.com/tvsupport
or to speak with a support representative:

1-800-222-SONY (7669)
For Canada
http://www.sony.ca/support
or to speak with a support representative:

1-877-899-SONY (7669)
Sony will work to resolve your questions

more quickly than your retailer or place of

purchase.

Please Do Not Return

the Product to the Store

Declaration of Conformity

Trade Name : SONY

Model : UWA-BR100

Responsible Party : Sony Electronics Inc.

Address : 16530 Via Esprillo, San Diego,

CA 92127 U.S.A.

Telephone Number : 858-942-2230
This device complies with part 15 of the

FCC rules. Operation is subject to the

following two conditions: (1) This device

may not cause harmful interference, and

(2) this device must accept any interference

received, including interference that may

cause undesired operation.

NOTIFICATION

This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur

in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the

equipment and receiver.

Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/

TV technician for help.

For Customers in Canada

This Class B digital apparatus complies with

Canadian ICES-003.

Precautions for use

Keep this product and this accessory out of

the reach of children.

This product is for use with the Unique 1.5

m extension cable only.

Do not pour water or other liquids onto

this product. Doing so may cause damage.

Do not place this product in a location near

a heat source, or a place subject to direct

sunlight. Doing so may cause a distortion

or malfunction.

Keep this product away from flammable

objects or naked flame sources (such as

lighted candles).

Do not repair this product by yourself.

Refer servicing to qualified personnel only.

Introduction

This product is the wireless adapter with

a USB connector. It is for use with Sony

products only. You can use this product by

connecting it to the USB port of a system

(such as a TV, Blu-ray Disc Player, Blu-ray

Home Theatre System, etc.).

Standards Compliance

Compatible with IEEE 802.11a/b/g and

802.11n

Note

Check the compatibility with the product

that you connect to. For details, refer to the

operating instructions of each product.

Accessories

USB Wireless LAN Adapter (1)

Unique 1.5 m extension cable (1)

Operating Instructions (this manual) (1)

Using the USB Wireless LAN

Adapter

Connect the USB Wireless LAN Adapter to the

USB port of a system (such as a TV, Blu-ray

Disc Player, Blu-ray Home Theatre System,

etc.). The optional product lineup differs

depending on the area.

Notes

The location where the transmission is

most effective differs depending on the

usage environment. In this case, use the

Unique 1.5 m extension cable. Be sure to

connect to target devices or the supplied

extension cable. Connecting to other

devices or other cables may cause

communication failure.

Check precautions and instructions about

the usage location of the product. For

details, refer to the operating instructions

of each product.

Specifications

Standards Compliance:

IEEE 802.11a/b/g/n

Host Interface:

USB 2.0

Security:

64/128 bit: WEP, WPA/WPA2, WPS

Frequency and Channel*

1

:

2.4 GHz – 2.4835 GHz [CH1 – 11]

5.15 GHz – 5.25 GHz [CH36 – 48]

5.25 GHz – 5.35 GHz [CH52 – 64]

5.47 GHz – 5.725 GHz [CH100 – 140]

5.725 GHz – 5.85 GHz [CH149 – 165]

Data Rate*

2

:

802.11a/g: 54, 48, 36, 24, 18, 12, 9 and

6 Mbps

802.11b: 11, 5.5, 2 and 1 Mbps

802.11n: up to 300 Mbps (40 MHz/spatial

streams: 2)

Power consumption:

Tx: up to 500 mA

Mass (Approx.):

USB Wireless LAN Adapter: 27 g (1 oz)

Dimensions (Approx.) (w × h × d):

USB Wireless LAN Adapter:

96 mm × 14 mm × 27 mm

(37/8 inches × 9/16 inches × 11/8 inches)

Design and specifications are subject to change

without notice.
*

1

The frequency and channel differ

depending on the area.

*

2

The transmission speed differs depending

on the distance and number of obstructions

between the transmission products, the

configuration of products, the radio wave

conditions, the line traffic, and the products

that you use. The transmission may also

be cut off depending on the radio wave

conditions. The standard values of the

transmission speed are the theoretical

maximum values for the wireless standards.

They are not the actual speeds of data

transmission.

Français

Mode d’emploi

Avant utilisation

Sécurité et réglementation

Conformément aux règlements de la FCC,

vous êtes averti que tous les changements ou

modifications non expressément approuvés

dans ce manuel pourraient annuler tous vos

droits relatifs à l’utilisation de ce produit.
Pour empêcher que cet appareil cause du

brouillage au service faisant l’objet d’une

licence, il doit être utilisé à l’intérieur et devrait

être placé loin des fenêtres afin de fournir

un écran de blindage maximal. Si le matériel

(ou son antenne d’émission) est installé à

l’extérieur, il doit faire l’objet d’une licence.
Les radars haute puissance sont alloués comme

utilisateurs principaux (autrement dit, comme

utilisateurs prioritaires) des bandes des

5250-5350 MHz et 5650-5850 MHz et peuvent

donc provoquer des interférences et/ou

endommager ce dispositif.
Ce dispositif utilise la bande des 5 GHz pour

les communications réseau sans fil et le gain

maximal de l’antenne intégrée est de 6 dBi.
Ce dispositif est conforme aux limites

d’exposition aux rayonnements de la FCC/IC

prescrites pour un environnement non

contrôlé. Ce dispositif doit être installé et

utilisé en laissant une distance minimale de

20 cm entre le radiateur et le corps (y compris

les extrémités : mains, poignets et pieds).
Ce dispositif et son (ses) antenne(s) ne

peuvent pas être implantés ou utilisés avec

d’autres antennes ou émetteurs sauf condition

Grant.

Pour votre commodité

Veuillez communiquer directement
avec le service à la clientèle de Sony
si vous :

Avez des questions sur l’utilisation de

votre Adaptateur USB réseau local sans

fil après avoir lu votre Mode d’emploi

Eprouvez des difficultés à utiliser votre

Adaptateur USB réseau local sans fil

Pour le Canada
http://fr.sony.ca/support
ou parlez à l’un de nos représentants :

1-877-899-SONY (7669)
Pour les États-Unis
http://www.sony.com/tvsupport
ou parlez à l’un de nos représentants :

1-800-222-SONY (7669)
Sony visera à résoudre vos questions

plus rapidement que votre détaillant ou

emplacement d’achat.
Ne retournez pas le produit au magasin

Déclaration de conformité

Appellation commerciale : SONY

Modèle : UWA-BR100

Partie responsable : Sony Electronics Inc.

Adresse : 16530 Via Esprillo San Diego, CA

92127 U.S.A.

Numéro de téléphone : 858-942-2230
Cet appareil est conforme à la section

15 des règlements de la FCC. Le

fonctionnement est soumis aux deux

conditions suivantes : (1) cet appareil

ne doit pas provoquer des interférences

gênantes; et (2) cet appareil doit pouvoir

accepter les interférences reçues, y compris

les interférences risquant de déclencher des

opérations non désirées.

AVIS

Cet appareil a été soumis à l’essai et s’est

avéré conforme aux limites pour un appareil

numérique de classe B, conformément à

la section 15 du règlement de la FCC. Ces

normes sont conçues pour assurer une

protection raisonnable contre les interférences

nuisibles dans un environnement résidentiel.

Cet appareil génère, utilise et peut émettre de

l’énergie radioélectrique et, s’il n’est pas installé

ou utilisé selon les directives, peut causer des

interférences nuisibles aux communications

radio. Cependant, il n’existe aucune garantie

que des interférences ne se produiront pas

dans une installation particulière. Si ce

matériel est source d’interférences nuisibles

pour la réception radio ou télévisée, ce qui

peut être déterminé en mettant l’appareil hors

tension, puis sous tension, il est recommandé

de tenter d’éliminer ces interférences en

appliquant l’une ou plusieurs des mesures

suivantes :

Réorienter ou déplacer l’antenne réceptrice.

Éloigner l’appareil du récepteur.

Brancher l’appareil dans une prise d’un

circuit différent de celui qui alimente le

récepteur.

Consulter le détaillant ou un technicien

radio ou télévision qualifié pour obtenir de

l’aide.

Pour les clients résidant au Canada

Cet appareil numérique de la classe B est

conforme à la norme NMB-003 du Canada.

Précautions d’utilisation

Tenez ce produit et cet accessoire hors de la

portée des enfants.

Ce produit doit être utilisé avec le cordon

d’extension 1,5 m exclusivement.

Ne renversez pas de l’eau ou d’autres

liquides sur ce produit. Cela risquerait de

l’endommager.

N’installez pas ce produit à proximité d’une

source de chaleur ou dans un endroit

exposé aux rayons directs du soleil. Ceci

pourrait entraîner sa déformation ou un

dysfonctionnement.

Tenez ce produit à l’écart des objets

inflammables ou des sources de flamme

nue (notamment des bougies allumées).

Ne réparez pas vous-même ce produit.

Confiez les réparations à un technicien

qualifié uniquement.

©2009 Sony Corporation

Printed in China

Advertising