Scag Power Equipment STWC61V-25KA-LC - Manual (Page 32)

28
R
Section 7
MAINTENANCE CHART - RECOMMENDED SERvICE INTERvALS 7.1
HOURS
PROCEDURE COMMENTS
BREAK-IN
(FIRST 10)
8 20 40 100 200 500
X
Check all hardware for tightness
X
Check hydraulic oil level See paragraph 7.3
X
C h e c k a l l b e l t s f o r p r o p e r
alignment See paragraph 7.8
X
Change engine oil and filter See paragraph 7.4
X
Check coolant level See paragraph 7.11
X
Check hydraulic hoses for leaks Use extreme caution when
checking the hydraulic hoses.
See paragraph 2.6
X
Check engine oil level See paragraph 7.4
X
*Clean mower See paragraph 7.12
X
Check condition of blades See paragraph 7.9
X
Apply grease to fittings See paragraph 7.2
X
Check tire pressure See paragraph 7.10
X
Inspect seat belt for wear or
damage See paragraph 2.5
X
Check the operator interlock
system See paragraph 4.2
X
Check coolant level See paragraph 7.11
X
Change engine oil and filter See paragraph 7.4
X
Check battery electrolyte level
clean battery posts and cables See paragraph 7.7
X
Check belts for proper alignment See paragraph 7.8
X
Apply grease to fittings See paragraph 7.2
X
Change engine oil See paragraph 7.4
X
*Clean air cleaner element See paragraph 7.6
* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions
MAINTENANCE