Samsung SFT-503 - Manual (Page 11)

Connecting Your Equipment
6
Connection
3. TV with Terrestrial antenna
1. Connect one end of
RCA/Cinch cable to the
RCA/Cinch jack on the back
of the STB and the other end
to a RCA/Cinch jack on your
TV. If your TV doesn’t have a
RCA/Cinch jack, connect one
end of RF cable to the TV
OUT on the back of the STB
and the other end to a RF input
jack on your TV.
2. Connect one end of RF cable to the ANT IN on the back of the STB and the other
end to a terrestrial antenna connection or the jack for public antenna on the wall.
3. Finally connect the coaxial cable from the LNB to the LNB IN jack on the STB.
4. TV with Motorised System (DiSEqC 1.2)
1. Connect one end of
RCA/Cinch cable to the
RCA/Cinch jack on the back
of the STB and the other end
to a RCA/Cinch jack on your
TV. If your TV doesn’t have a
RCA/Cinch jack, connect one
end of RF cable to the
TV OUT on the back of the STB
and the other end to a RF input
jack on your TV.
2. Connect one end of your coaxial cable to the LNB IN connector on the STB
and the other end to the REC or Receiver connector on the DiSEqC 1.2 motor.
3. Connect the coaxial cable from the LNB to the LNB connector on the
DiSEqC 1.2 motor.
(To RCA/Cinch on your TV)
(To RCA/Cinch on your TV)
(If your TV doesn’t
RCA / Cinch Jack)
(If your TV doesn’t
RCA / Cinch Jack)
user's 4/9/01 3:24 PM Page 11